Cast steel manual control valve T10H-16C

T10H manual control valve is only applicable to the nominal pressure ≤ 1.6MPa and medium temperature t ≤ 250 ℃ steam or hot water pipeline as a flow control. Clockwise rotation of the handwheel to close the manual control valve, the valve stem drives the valve flap down, until the two conical sealing surface contact to reach a tight pipeline closure, mainly used for centralized urban heating, district heating, circulating water projects, thermal power plant network and refrigeration and air-conditioning and other projects, with a cut-off, throttling and regulating the flow rate of the role of the valve can be replaced by throttling the orifice plate, a throttle device can be changed to the aperture.

Product Features

1. Improvement of heating supply conditions: Where the manual control valve branch line and heat points can be designed according to the conditions of flow regulation, to achieve a good temperature conditions, this control valve than the gate valve, globe valve regulating performance is good, it has an approximate straight-line regulating performance. Therefore, the heating buildings of the uneven heating and cooling phenomenon has been strongly improved.
2. Energy saving: the heat pipe network due to the temperature and pressure imbalance, resulting in some branches of the flow is too large, so that some buildings are too high temperature, the user has to open the window, a lot of heat energy wasted, due to the installation of the branch of the manual regulator valve, to overcome the temperature and pressure imbalance, to avoid opening the window, to achieve the purpose of saving energy.
3. Improvement of network pipe hydraulic conditions: manual adjustment valve can be controlled in accordance with the rated flow rate, the network pipe overrun to reduce the flow rate, so that the original degree of deterioration of the water working conditions have been improved to a certain extent.

Product Parameters

Product Size Reference